Barcode Scanner Controller

The Bar Code Scanner Controller controls up to two bar code scanners/verifiers.

Provides key-switch “teach” functionality, pushbutton reset, indication lights, buzzer and external device plug-in connector, so wiring is not necessary. Provides 100% inspection of Barcodes. With the SV-100 Scanner Verifier you can analyze linear barcodes and reject based on barcode quality. Set it for “C” grade or better. Will reject if barcode does not meet ANSI standards.

• Scan or verify inkjet barcodes
• Improve Quality
• Increase Productivity
• Avoid Unnecessary Costs (Detect the bad barcodes before your customer does)
• Verify barcodes on any surface and media

Download Brochure on the HSAJet-BSC Barcode Scanner Controller

Features Alarm Light output Operator Interface Teach/On/Off keyed switch Audible buzzer Main Power Switch has EMI/RFI filtering and replaceable fuses Connection for Scanner/Verifier #1 Serial connection Trigger signal Connection for Scanner/Verifier #2 Auxiliary output connections used when either a “Mismatch” or a “No-Read” condition occurs. Set scanner/readers to alarm with any number of consecutive bad reads Reset to clear faults